UNI-T UT-P05 Passive Oscilloscope Probe- 200 Mhz
In Stock
Categories: UNI-T
Overview
Description
UNI-T UT-P05 200MHz Passive Oscilloscope Probe
Product Description
The UNI-T UT-P05 Passive Oscilloscope Probe is a high-impedance measurement accessory designed for observing and analyzing electrical signals with digital oscilloscopes. With a bandwidth of up to 200MHz in 10X mode and selectable 1:1 and 10:1 attenuation, it provides flexibility for measuring different signal levels in electronic circuits.
The UT-P05 features two selectable attenuation settings. In 1X mode, it provides a direct signal connection with a bandwidth of up to 6MHz. In 10X mode, the input signal is attenuated by a factor of ten, allowing measurements at higher voltage levels while reducing the probe's loading effect on the circuit. The oscilloscope channel must be configured to match the selected probe attenuation to display the correct voltage.
Its high input impedance helps minimize circuit loading during measurements. The probe provides an input resistance of 1MΩ in 1X mode and 10MΩ in 10X mode, making it suitable for general-purpose electronic testing and signal analysis.
The UT-P05 uses a standard BNC connector for connection to compatible oscilloscopes. Its approximately 1.3-meter cable provides flexibility when probing circuit boards, electronic assemblies, and test points. An adjustable compensation range of 5pF to 30pF allows the probe to be compensated to match the oscilloscope input.
The UNI-T UT-P05 is suitable for engineers, electronics technicians, students, and laboratory users working with analog and digital signals. It can be used for waveform observation, circuit debugging, signal verification, and electronic equipment maintenance.
Features
Passive high-impedance oscilloscope probe
Up to 200MHz bandwidth in 10X mode
Selectable 1X and 10X attenuation
1MΩ / 10MΩ input resistance
Standard BNC connector
Adjustable probe compensation
Approximately 1.3m cable length
Suitable for analog and digital signal measurements
Compatible with UNI-T oscilloscopes and other oscilloscopes with suitable BNC inputs
Specifications
Parameter | Specification |
|---|---|
Brand | UNI-T |
Model | UT-P05 |
Product Type | Passive Oscilloscope Probe |
Bandwidth (1X) | Up to 6MHz |
Bandwidth (10X) | Up to 200MHz |
Attenuation Ratio | 1:1 / 10:1 |
Input Resistance (1X) | 1MΩ |
Input Resistance (10X) | 10MΩ |
Input Capacitance (1X) | 85–115pF |
Input Capacitance (10X) | 14.5–17.5pF |
Compensation Range | 5–30pF |
Maximum Input Voltage (1X) | Less than 200V peak |
Maximum Input Voltage (10X) | Less than 600V peak |
Connector | BNC |
Cable Length | 130cm ± 1.5cm |
Operating Temperature | -10°C to +50°C |
Operating Humidity | Less than 85% RH |
Applications
Oscilloscope waveform measurement
Analog and digital signal analysis
Electronic circuit debugging
PCB testing and troubleshooting
Embedded-system signal testing
Microcontroller circuit measurements
Power and control circuit analysis
Electronic equipment maintenance
Engineering laboratories and educational projects
Research and development
Frequently Bought Together
Related Products
Recently Viewed
UNI-T UT-P05 Passive Oscilloscope Probe- 200 Mhz
750.00 EGP